FM RADIO MODE
FM SETTINGS
Press the MENU button to access the FM MODE MENU. From here you can set some FM
preferences such as SCAN SETTING and AUDIO SETTING.
SCAN SETTING allows you to decide whether the radio should stop scanning only when it
fi nds a station with a strong signal.
AUDIO SETTING gives you the option of listening to a station in mono, should the signal
strength not be su ciently strong to allow stereo reception.
AUXILIARY INPUT MODE
AUXILIARY INPUT MODE allows you to play audio from an external source through your
radio.
To do so, connect your external audio source to the 3.5mm AUX IN connector on the rear of
the Eames Radio.
Turn the volume down on both the Eames Radio and, if adjustable, the external device.
Now press MODE until the AUXILIARY INPUT MODE intro screen is displayed.
Adjust the volume of the Eames Radio and, if necessary, the external audio device as
required.
FM
FM
<Scan setting >
FM
<Audio setting >
Auxiliary Input
Auxiliary Input
12: 50: 32
11
EN
To Next Page
Loading...