The Eames Radio is supplied with a multi-region power supply, meaning
that it can be operated in a number of countries around the world.
Simply choose the correct adaptor for your country from the
selection supplied and attach to the PSU as per the illustration opposite.
POWER SUPPLY (PSU)
EAMES RADIO
Design : Charles & Ray Eames, 1946
USB
AUX IN
18V DC
1.3A
5V 1A
1 2
Please fully extend the antenna before powering the Eames Radio for
the fi rst time.
INITIAL SET-UP
Using the PSU supplied, connect one end to the DC power socket found
on the rear of your radio, then plug the opposite end into the mains
socket on the wall. The Eames Radio will now automatically perform a
scan to see what DAB stations are being broadcast in your area.
05
EN
To Next Page
Loading...