V7X Series Operating Manual - November 21, 2012
SECTION 1 – PRODUCT INFORMATION
FEATURES
Easy to Use
o 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface
o Large High Reliability START and STOP switches
o Large easy to see PASS/FAIL Indicators
Easy to Own
o Low Cost of Ownership - 2 Year Calibration Interval, 2 Year Parts & Labor Warranty
o In-Field Updating of Firmware
o Compact and Lightweight
o Only consumes 5W when not testing
High Quality
o Made in the USA - Designed & Built in San Diego CA
Reliable
o Rugged Construction
o Fan free, vent free Design
o High Efficiency Switch-Mode Drive with low temperature rise
Full Function
o Fast (100ms min test time) and Accurate (1%)
o 5 Functions - AC/DC Hipot, Insulation Resistance, Ground Bond & Low Resistance
5KV AC/DC Hipot, 20mA max source current, 100nA Leakage Current Resolution
Continuously Variable Insulation Resistance 20-5000V up to 450GΩ
Ground Bond 1-30A RMS, 100µΩ Resolution
Wide range (0 to 60KΩ) low resistance measurements with 1mΩ resolution
o Ramped Discharge Capability
o Selectable ARC Detection
o Multi-Mode IR with Steady or Rising Pass Mode
o Able to test either grounded or non-grounded DUTs
o Wide range of capacitive loads can be tested (up to several µF)
Built-In Verification
o Completely Internal Self-Test Fully Exercises Output and Verifies Current Accuracy
o Pre-Programmed Daily Verification Test With Optional PVD Test Load
Safe
o 150µs Safety Shutdown
o Automatic DUT Discharge
o Meets UL, CSA, IEC Safety Tester Requirements
o CE Safety Mark Certified to EN61010
Equally at home in simple and complex systems
o USB 2.0, Serial RS232 and Digital I/O Interfaces are Standard
o Able to be used in Complex Multi-Point Scanning Systems
o Test Memory Stores up to 999 Steps and 60 Test Sequences which can be named by the user
o Test steps for on-screen prompted user actions
o On-screen review of complete test results for every test step
AVAILABLE MODELS, OPTIONS, SOFTWARE AND ACCESSORIES
MODELS
All models have USB 2.0, Serial RS232, Digital I/O and External Switch System (VICL) interfaces as standard.
To Next Page
Loading...