Need help?Do you have a question about the Vitus Audio SIA-030 and is the answer not in the manual?
General| Brand | Vitus Audio |
|---|---|
| Model | SIA-030 |
| Category | Amplifier |
| Language | English |
Fields for recording product details like model, serial, and build date.
Author's message expressing gratitude and Vitus Audio's philosophy on musical performance.
Introduction to the manual's purpose and how to use it for operating the SIA-030.
Overview of the Vitus Audio Signature Series, emphasizing high-end audio and quality materials.
Important safety warning about the amplifier's weight and proper handling during unpacking.
Step-by-step instructions on how to safely unpack the SIA-030 amplifier.
Lists all the components included in the package with the SIA-030.
Details the physical characteristics, material, dimensions, and weight of the SIA-030.
Explains the unique resistor network design used for volume control in the SIA-030.
Provides the correct procedure for powering the SIA-030 on and off to prevent damage.
Identifies and describes the various output and input connectors on the rear of the SIA-030.
Guides on how to connect sources, speakers, and mains power to the SIA-030.
A detailed diagram of the SIA-030 rear panel with all connectors labeled.
Details the three operational modes: Normal for listening, Menu for settings, and Standby for deactivation.
Describes the functions of the buttons on the left side of the SIA-030's front panel.
Describes the functions of the buttons on the right side of the SIA-030's front panel.
Explains the various sub-menus and their functions available within the SIA-030's menu system.
Details how to change settings for each input, including naming and disabling inputs.
Allows setting a fixed volume step for an input, locking it from volume control adjustments.
Adjusts the fixed dB step within a specific range, only available when FIX ON is selected.
Adjusts the gain of individual inputs to match source output levels, reducing volume differences.
Adjusts input sensitivity levels to minimize differences and prevent input clipping.
Allows disabling unused inputs to skip them during input selection.
A flowchart illustrating the navigation path and options within the SIA-030's menu system.
Warns against opening the unit and advises contacting a dealer for malfunctions due to internal high voltages.
Explains the selectable mains supply voltages (100V, 115V, 230V/240V) for the unit.
States that the product requires minimal maintenance and advises contacting a dealer for issues.
Describes the location and accessibility of the mains fuse and the implications of it blowing.
Specifies the correct type and rating of the fuse required for replacement and warns against using incorrect fuses.
Step-by-step guide with illustrations on how to safely replace a blown fuse in the unit.
Outlines the terms and conditions of the limited warranty for the Vitus Audio product.
Specifies the warranty duration, exclusions, and conditions for valid claims.
Details the conditions under which the warranty is void, including misuse and unauthorized repair.
Clarifies that the warranty is non-transferable and only valid for the original buyer.
States the warranty period, which is three years from purchase or five years from shipment.
Excludes damage or cosmetic defects to the chassis from warranty coverage.
Specifies warranty terms for demonstration units provided by authorized dealers.
Covers implied warranties, incidental/consequential damages, and consumer rights.
Provides contact information and required details for warranty inquiries and service.
Explains how warranty service is handled for products purchased outside Denmark.
Provides contact information for additional questions regarding the warranty.
Lists the technical specifications of the SIA-030, including power, frequency response, and dimensions.
Step-by-step guide to change the amplifier's operating class from AB to Class A via the menu.
Demonstrates how to disable unused inputs on the SIA-030 to simplify input selection.
Shows how to set a fixed volume level for a specific input, locking it from adjustment.
Guides on adjusting input offset gain to balance volume levels between different sources.
Illustrates how to modify the input sensitivity setting for an input channel.
Provides instructions for renaming an input source on the SIA-030 through the menu.
Step-by-step guide to reset all SIA-030 settings to their factory default values.
Explains how to set the default volume level the SIA-030 starts with upon activation.
Demonstrates how to adjust the display brightness level of the SIA-030.
Introduces the devices used in the connection examples, showing diagrams of each.
Illustrates a basic setup connecting a Media Center, Turntable, SCD-025, and SIA-030.
Shows how to connect devices using SIA-030 DAC/Streamer and RIAA extensions.
Demonstrates connecting an active subwoofer to the SIA-030's Pre-out connector.
Introduces the RC-010 remote, its features, battery, and standby function.
Lists the items included with the RC-010 system remote, such as the remote itself and charger.
Provides an overview of the RC-010 remote's physical dimensions, material, and weight.
Describes the four operational modes of the RC-010 remote: Normal, Menu, Standby, and Shipping.
Details the 11 basic functions and buttons available on the RC-010 in Normal mode.
Explains the 6 information fields displayed on the RC-010 screen in Normal mode.
Lists the 8 basic functions and buttons available on the RC-010 when in Menu mode.
Describes the 2 different screen layouts and 6 sub-menus of the RC-010 in Menu mode.
Explains the screen layouts for specific sub-menus like EDIT PRODUCT, and how to navigate them.
Describes the display layouts for PROGRAM KEY and SELECT KEY sub-menus and their functions.
Overview of how to modify RC-010 settings via the menu, listing sub-menus like FABRIC, ADD PRODUCT, etc.
Explains the function of each menu item and button on the RC-010 remote control.
A graphical representation of the RC-010's menu navigation flow and options.
Step-by-step guide on how to disable products not in use from the RC-010's product list.
Instructions on how to set hotkeys on the RC-010 to easily switch between products like SP-103.
Guide on setting hotkey 1 to SP-103 and hotkey 2 to SIA-030 for the SCD-025.
Instructions on setting hotkey 1 to SCD-025 and hotkey 2 to SIA-030 for the SP-103.
Step-by-step guide on how to add a new product to the RC-010's predefined product list.
Instructions on how to program the buttons of a newly added product using RC5 codes.
Guide on changing hotkey 1 from a product (SCD-025) to a specific input (INPUT 3).
Step-by-step instructions on how to restore the RC-010 remote control to its factory default settings.
Instructions on how to adjust the display power-down delay time on the RC-010 remote.
Lists the technical specifications for the RC-010 remote and its charger.
Details the functions of each button on the RC-010 for various Vitus Audio products.
Continues the table of button functions for additional Vitus Audio models like SM-011 and MP-P201.
A photograph showing the internal components and layout of the SIA-030 amplifier.
A photograph showing the front panel of the SIA-030 amplifier, highlighting its design and controls.
A photograph displaying various color finishes of the RC-010 remote control.
To Next Page
