Vivax Metrotech vLoc3-MLA Training

110
Signal Direction (SD) - Synchronize
• To synchronize the receiver to the transmitter at the beginning of a survey, pinpoint the line
very close to the transmitter.
• Stand facing away from where the transmitter is attached and press “i” pushbutton.
• Press the return pushbutton will synchronize the system, then return the unit to the locate screen.
• The top portion of the bezel surrounding the compass will light and not be flashing indicating the
receiver is locked onto the signal.

Vivax Metrotech vLoc3-MLA Specifications

General

Brand	Vivax Metrotech
Model	vLoc3-MLA
Category	Receiver
Language	English