116
Data Logging
Records stored by the user whenever the “+” button is pressed when in the “Information” screen.
To store a record first locate a point of interest. Hold the vLoc stationary
over the target and press the “i” pushbutton. When in the depth and
current screen, press the “+” pushbutton to save the data. The “Log”
number indicates the number of records stored. To exit the screen
without logging the data, press the “-” button.
If the GPS function is enabled the GPS coordinates will also be
displayed and attached to any saved file.
When the save button is pressed the Log number will increment and the
arrow below the check sign will turn green indicating that the data has
been stored successfully.
The data log can also be deleted from the Info screen. From the Info
screen press and hold the “-” key. The message below will be shown.
To Next Page
Loading...
Need help?
General
