Vivax AC-608 - Malfunction and Maintenance

VIVAX ENG
10
3. Clean the water tank
Unplug the power plug ,draw out the tank, pull the water filter up and
use soft brush clean it. use neutral detergent and soft cloth rub inside of
the tank.
4. Clean the shell
Clean with neutral detergent and soft cloth.
Attention:
- Must unplug the power plug when cleaning.
- Don't make the water into the control panel.
MALFUNCITON AND MAINTENANCE
Malfuction Possible reasons Solution
No action
1.Power off or poor connection
2.Not press the power at the
back of body.
3.Not Press the "ON/OFF" key
on the control panel.
1.Plug the power cord and
make sure it connects
well.
2.Press the power at the
back of body.
3.Press the "ON/OFF" key
on the control panel.
Poor result
of
dedusting
1. Block the air filter screen with
dust.
2. Block the air inlet with corpus
alien.
1.Remove and clean the
air filter screen.
2.Remove corpus alien
from the air inlet.
Repair the appliance under the situation as follows:
1. Abnormal action or no action.
2
. Abnormal action since ingress of water or corpus alien.