VIVAX ENG
18
Reversing the Door
Caution: To avoid injury to yourself and/or property we recommend someone assist you
during the door reversal process.
Ensure the appliance is unplugged and empty.
We recommend you have someone to assist you.
Tools required: Cross-bladed screw driver
NOTE: To take the door off it is necessary to tilt the appliance backward.
You should rest the appliance on something solid, e.g. a chair just below the top panel so
you can access the bottom of the refrigerator.
DO NOT lay the appliance completely flat as this may damage the coolant system.
1. Power off the refrigerator, and remove all
objects from the door trays.
2. Secure the refrigerator door with adhesive tape
to prevent the falling of the door when you
remove the hinges.
3. Remove 2 screws from back top cover and remove top cover.
4. Remove the screws fixed the top-hinge with cross-slot screwdriver and remove
hinge.
5. Carefully lift the door and detch door from bottom hinge. Loosen the lower hinge
screws and carefully remove the lower hinge.
6. Remove the screws fixed the bottom-hinge with cross-slot screwdriver and
remove hinge.
94 / 118
To Next Page
Loading...
Need help?
General
