PRODUCT DESCRIPTION
The Vive suction cup grab bar is a versatile tool that allows you to place a
sturdy hand rail wherever you have a flat surface. Its suction cup design lets you
reposition the bar as necessary without the hassle of professional installation,
while its locking levers and sturdy build guarantee your safety with every use.
Protected by a 60 day warranty.
WHAT'S INCLUDED
• lx 12" or 16.5" Suction Grab Bar
• Vive Guarantee
SPECIFICATIONS
• Length: 12"or 16.5"
• Depth: 3.25"
• Width: 4.25"
• Product Weight: 1LB
WARNINGA
• Check periodically to make sure all fixings are tight and secure before every
use. If it feels loose, flip up the latches and reinstall the product following the
installation instructions.
• Suction Grip Bar isto be used as a balance assistonly. Not for body weight
leverage - body weight is not to be applied fully to the bar.
INSTALLATION INSTRUCTIONS
No Tools Required!
2.
3.
4.
Remove product from carton and read instructions carefully before
attempting to assembly the product. No tools required.
Check the suction cups and check the smooth, pore-tight surface to make
sure it isclean thoroughly before placing the suction grab bar.
Firmly press rubber suction cups to the clean flat surface making sure the
latches are up and suction cups are flat and not lying on any grout lines,
cracks or joints where suction will not be secure.
Apply pressure to the handle grip while flipping down both latches into
the lock position. The resistance of the negative pressure generated must
be clearly felt. The greater the resistance the stronger the suction. The
indicator on the side of the suction cup will change from REDto GREEN
To Next Page
Loading...