English
373737
4. Operating instructions
3. Place the rotating ring (8) on the rotating plate drive (7) (Fig. 1).
4. Place the rotating plate (9) on the rotating ring (8) (Fig. 2).
5. If the grill rack (10) is being used, place it on the rotating plate (9) (Fig. 3).
6. The appliance is now ready for use.
Fig. 1 Fig. 2 Fig. 3
4.5 Setting the time
Note: The time does not need to be set in order to use the appliance.
Note: If the appliance was disconnected from the mains, the time has to
be set again.
1. Connect the plug (3) with a suitable mains socket.
2. The display (27) lights up and shows “1:01” and the symbol time
(17). A
signal tone sounds.
3. Press the button UHR (34) twice, to choose between 12- or 24-hour time format.
4. While the time format is being displayed, turn the control knob
(31), to
set the hours. The hour number flashes on the display (27).
5. Press the button UHR (34) again, to switch to setting the minutes.
6. Turn the control knob
(31), to set the minutes. The minute number
flashes on the display (27).
7. Press the button UHR (34), to save the settings.
Note: If no adjustment is being made for approx. 30 seconds, the previous
time is being shown on the display (27). The settings were not saved.
Microwave_MWG11001SW_IM_DE_GB_160204.indb 37 17/5/2016 4:09 PM
English
3838
4. Operating instructions
Note: The current time can be displayed during use by pressing the button
UHR (34) once.
4.7 Child lock
To prevent the accidental use of the appliance, it is equipped with a child lock.
1. Press the button STOP/CANCEL (33) for approx. 5 seconds, to activate the
child lock. The symbol child lock
(18) is shown on the display (27).
2. Press the button STOP/CANCEL (33) again for approx. 5 seconds, to deactivate
the child lock. The symbol child lock
(18) is no longer shown.
4.8 Microwave function
Note: The maximum timer that can be set, when using the microwave
function, is 60 minutes.
1. Connect the plug (3) with a suitable mains socket.
2. Open the door (12) and place the cookware with the prepared food in the
middle of the rotating plate (9). Please pay attention to the table in paragraph
4.3 Cookware.
3. Close the door (12).
4. Press the button POWER (28), to set the desired power level. The symbol power
(19) and the corresponding symbol power are shown while setting the power.
The power level can be set from 100% to 0% in 20% steps.
5. Turn the control knob
(31), to set the desired cooking time. The cooking
time can be set in 10 seconds steps.
6. Press the button
(29), to start the cooking process. The symbol operation
(15), symbol microwave function (25) and corresponding symbol power
are displayed during use.
7. After the cooking time has passed, a signal tone sounds and the display (27)
shows the current time.
8. Open the door (12) and remove the cookware.
WARNING - Danger of burns! The cookware is hot. Always use oven
mittens to remove cookware or accessories.
9. Close the door (12).
Microwave_MWG11001SW_IM_DE_GB_160204.indb 38 17/5/2016 4:09 PM
To Next Page
Loading...