Vivid Audio V1p User Manual

Owner’s Guide
V1p and V1w loudspeaker
Read these instructions that contain important information about the
safe use, installation and maintenance of this loudspeaker.
• Unpack the loudspeaker following the instruction sheet attached to the
shipping crate. The method is also described below. Check for
damage. Keep potentially hazardous packaging (plastic bags,
polystyrene etc.) out of reach of children.
• Dispose of packaging in compliance with current waste disposal
requirements.
• This loudspeaker must only be used for the purpose for which it is
intended.
• The manufacturer declines all responsibility for damage resulting from
improper, incorrect or negligent use.
• Repairs must only be carried out by a service centre authorised by the
manufacturer.
• Failure to comply with the above requirement will jeopardise the safe
use of the loudspeaker and associated guarantees (if applicable).
1

Vivid Audio V1p Specifications

General

Configuration	2-way
Sensitivity	87dB (2.83V/1m)
Impedance	6 Ohms
Power Handling	150W
Tweeter	26mm metal dome

Summary

Important Note

Introduction

About Vivid Audio

Information about the company's philosophy, enthusiasm, and expertise in loudspeaker design and engineering.

Installation and Setup

Unpacking the Loudspeaker

Step-by-step guide for safely unpacking the loudspeaker from its shipping crate, including handling precautions.

Stand Mounting (V1p only)

Recommendations for stand mounting the V1p loudspeaker, including optimal height, spiking, and bonding.

Wall Mounting (V1w only)

Instructions for wall mounting the V1w loudspeaker, detailing methods for dry walling and brick/mortar.

Maintenance and Cleaning

User Serviceability and Repairs

Statement regarding no user-serviceable parts and referral of all problems to the dealer.

Cleaning Instructions

Instructions for cleaning the loudspeaker using only a soft, moistened, lint-free cloth.

Service and Guarantee

Service Notes

Information regarding service availability, conditions, and contacting Vivid Audio for support.

Product Guarantee Details

Details of the product guarantee, including duration, validity, exclusions, and registration requirements.

Specifications

Technical Specifications

Detailed technical data for the V1 loudspeaker, including configuration, materials, drive units, and dimensions.