18G HDMI Repeater w/ Audio Extraction
Package List
Please take an inventory of the package contents to ensure you have all the items listed below. If
anything is missing or damaged, please contact your distributor for a replacement.
1 x Power Adaptor (12VDC,1A)
1 x 5-pin Phoenix Connector
Panel Description
① Bicolor LED: GREEN when powered on, Green when HDMI signal input.
② Audio Modes Switcher:
PASS (default): The source device obtains its EDID from display.
BITSTREAM: If the display only supports PCM, and the format of audio source is DTS/Dolby, the
switcher should be turned to BITSTREAM to ensure the DTS/Dolby audio can be output via HDMI
and coaxial digital audio ports (⑥&⑨), there will be no audio output on analog audio ports(⑦&⑧).
BITSTREAM: If the format of source audio is PCM, and it should be DTS/Dolby to be processed
via AV amplifier, the switcher should be turned to BITSTREAM, there will be no audio output on
analog audio ports(⑦&⑧).
PCM: If the digital audio need to be output via analog audio ports(⑦&⑧), the switcher should be
turned to PCM, and the coaxial audio port(⑨) will also output PCM audio.
③ HDMI IN: Connect with HDMI source.
④ FW: Firmware upgrade.
⑤ DC 12V: Connect with the included power adaptor.
⑥ HDMI OUT: Connect with HDMI display.
⑦ L/R: Stereo balanced L/R audio output.
⑧ L/R: analog RCA audio output.
⑨ COAX: Coaxial digital audio output.
DC 12V FW HDMI IN
BITSTREAM
PASS PCM
1
2
3
4
5
COAXL RL RHDMI OUT
6
7
8 9
To Next Page
Loading...