VIVOTEK
User's Manual - 131
A green bar indicates that even though motions have been detected, the event has not been
triggered because the image variations still fall under the preset threshold.
If you want to congure other motion detection settings for day/night/schedule mode (e.g., for a
different lighting condition), please click
Prole
to open the Motion Detection Prole Settings page
as shown below. Another three motion detection windows can be congured on this page.
Larger than the
min. item size
Photos or videos can be captured instantly and congured to be sent to a remote server (via an
Email or FTP server). For more information on how to congure an event setting, please refer to
Event settings on page 116.
Please follow the steps beolw to set up a prole:
1. Create a new motion detection window.
2. Click the
Prole mode
tab.
3. Select the applicable Schedule mode. Please manually enter a time range.
4. Click
Save
to enable the settings and click
Close
to exit the page.
To Next Page
Loading...
Need help?
General
