Vivotek IB9391-EHT - Page 194

VIVOTEK
194 - User's Manual
vity
<product
dependent>
1~20: level 1
21~40: level 2
41~60: level 3
61~80: level 4
81~100: level 5
Level 1~4(low ~ high)
The higher sensitivity level meas that
it is easy to be trigger while scene
changed.
* Only available when
"capability_image_c<0~(n-1)>_aesp
eed" is 1 and
"capability_image_c<0~(n-1)>_aesp
eedsupportsensitivity" is 1.
flickerless
<product
dependent>
<boolean> 4/4 Turn on(1) or turn off(0) the flickerless
mode
* Only available when
"capability_image_c<0~(n-1)>_flicke
rless" is 1.
mounttype ceiling, wall, floor 1/6 Hardware installation.
* Only available when
"capability_videoin_c<0~(n-1)>_mou
nttype" != "-".
enablewatermar
k
<product
dependent>
0, 1 1/6 0: Not to add watermarks on images
1: Add watermarks on images
* Only available when
"capability_fisheye" > 0
s<0~(m-2)>_fi
sheyedewarpmo
de

<product
dependent>
‘1O, 1P, 2P, 1R, 4R’ for ceiling/floor
mount
‘1O, 1P, 1R, 4R’ for wall mount
<product dependent>
1/4 Local dewarp mode.

“1O” is original mode (disable).
Supported dewarp mode is different by
mount type.
(videoin_c<0~(n-1)>_mounttype)
Supported mode list could be
extracted from
(capability_videoin_c<0~(n-1)>_local
dewarp_typeceilingmount) and
(capability_videoin_c<0~(n-1)>_local
dewarp_typewallmount)