Vivotek IB9391-EHT - Page 248

VIVOTEK
248 - User's Manual
wireless_beginchannel 1 ~ 14 0/7 Indicate the begin channel of wireless network
wireless_endchannel 1 ~ 14 0/7 Indicate the end channel of wireless network
wireless_encrypt_wep <boolean> 0/7 Indicate whether to support wireless WEP.
wireless_encrypt_wpa <boolean> 0/7 Indicate whether to support wireless WPA.
wireless_encrypt_wpa2 <boolean> 0/7 Indicate whether to support wireless WPA2.
wireless_apmode_enable <boolean> 0/7 Indicate whether wireless AP mode is
supported.
* Only available when
"capability_network_wireless" is "1".
* We support this parameter when the version
number (httpversion) is equal or greater than
0305a.
wireless_apmode_ssidpref
ix
<string> 0/7 Indicate the prefix of broadcasted SSID when
camera is in wireless AP mode.
* Only available when
"capability_wireless_apmode_enable" is "1".
* We support this parameter when the version
number (httpversion) is equal or greater than
0305a.
derivative_brand <boolean> 0/7 Indicate whether to support the upgrade
function for the derivative brand. For example,
if the value is true, the VVTK product can be
upgraded to VVXX. (TCVV<->TCXX is
excepted)
test_ac <boolean> 0/7 Indicate whether to support test ac key.
version_onvifdaemon <string> 0/7 Indicate ONVIF daemon version
version_onviftesttool <string> 0/7 Indicate ONVIF test tool version
media_totalspace <positive integer> 0/7 Available memory space (KB) for media.
media_snapshot_maxpre
event
<positive integer> 0/7 Maximum snapshot number before event
occurred.
media_snapshot_maxpost
event
<positive integer> 0/7 Maximum snapshot number after event
occurred.
media_snapshot_maxsize <positive integer> 0/7 Maximum size (KB) of a snapshot.
media_videoclip_maxsize <positive integer> 0/7 Maximum size (KB) of a videoclip.