Vivotek IB9391-EHT - Page 260

VIVOTEK
260 - User's Manual
mjpeg_maxbitrate <positive integer>, - 0/7 Maximum bitrates of MJPEG.
The unit is bps.
"-" means MJPEG does not support bit rate
control.
* Only available when 'mjpeg' is listed in
"capability_videoin_codec".
h264_maxframerate A list of <Positive
Integer> and "-"
0/7 Maximum fps that the device can encoded with
H.264 on resolutions in current video mode.
"-" means not support.
* One to one mapping to the resolution in
"resolution".
* The element number is defined as "nresolution"
in this group.
* This parameter may be changed when
"videoin_c<n>_cmosfreq"=50 or
"videoin_c<n>_modulation"=pal.
Ex: 30 fps is changed to 25 fps, 60 fps is changed
to 50 fps, and so on.
* Only available when 'h264' is listed in
"capability_videoin_codec".
h264_maxbitrate <positive integer> 0/7 Maximum bitrates of H.264.
The unit is bps.
* Only available when 'h264' is listed in
"capability_videoin_codec".
h264_profile baseline,main,high 0/7 Indicate H264 profiles
* Only available when 'h264' is listed in
"capability_videoin_codec".
* We support this parameter when the version
number (httpversion) is equal or greater than
0309a.