VIVOTEK
262 - User's Manual
mounttype ceiling, wall, floor,-
<product dependent>
0/7 Indicate the supported mount type.
"-": not support
* We support this parameter when the version
number (httpversion) is equal or greater than
0309c.
dintraperiod_support <boolean> 0/7 0: Non-support "Dynamic intra frame period"
1: Support "Dynamic intra frame period"
"Dynamic intra frame period" can be used to
reduce bitrate by reducing the number of I-frame.
* We support this parameter when the version
number (httpversion) is equal or greater than
0301c.
cameraunit_name CU8131,
CU8171,
CU8161-H,
CU8162-H,
CU8163-H,
CU8361-H,
...,
-
<product dependent>
0/7 A "camera unit" name of a split-type camera
system, which the camera unit and the video core
are separated.
-: If the camera is not a split-type camera system,
the value of this parameter is "-".
* We support this parameter when the version
number (httpversion) is equal or greater than
0302b.
cmosfreq_support <boolean> 0/7 0: The power line frequency(50/60Hz) is detected
by camera automatically.
1: The power line frequency(50/60Hz) can be set
by user.
* We support this parameter when the version
number (httpversion) is equal or greater than
0308a.
smartfps_support <boolean> 0/7 Indicate whether to support Smart fps function.
* We support this parameter when the version
number (httpversion) is equal or greater than
0309a.
smartq_support <boolean> 0/7 Indicate whether to support Smart Q function.
* We support this parameter when the version
number (httpversion) is equal or greater than
0309a.
To Next Page
Loading...
