Vivotek IB9391-EHT - Page 361

VIVOTEK
User's Manual - 361
8.30 Preset Locations
(capability_camctrl_c<0~(n-1)>_zoommodule = 1)
Note: This request requires Operator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/operator/preset.cgi?[channel=<value>]
[&addpos=<value>][&delpos=<value>][&return=<return page>]
PARAMETER VALUE DESCRIPTION
addpos string[30] Add one preset location to the preset list.
channel 0~"capability_nvideoin"-1 Channel of the video source.
delpos string[30] Delete preset location from preset list.
return <return page> Redirect to the page <return page> after the parameter is assigned.
The <return page> should be the relative path according to the root
of camera. If you omit this parameter, it will redirect to an empty
page.
* If the <return page> is invalid path, it will ignore this parameter.