Align the neck with the base and snap it
into place.
Using a Phillips screwdriver, insert
three (3) screws into holes on the bottom of
the base and tighten them to secure it to
the neck.
2
Align the neck piece with the slot in the bottom of
the TV and slide it into place as shown.
Using a Phillips screwdriver, insert the remaining
four (4) screws into the holes on the back of the TV
and tighten them to secure the neck to the TV.
When you are finished, place the TV on a stable,
level surface.
3
To Next Page
Loading...
Need help?
General
