Vizio M3D460SR - Page 19

The colors on the TV
don’t look right.
•AdusttheColorandTintsettingsinthePicturemenu.See Adjusting the Picture Settings in the user manual.
•Resetthepicturesettings.See Resetting the Picture Settings in the user manual.
•Checkallcablestoensuretheyaresecurelyattached.
I cannot return to
the Setup App.
•Theon-screenmenuhasguidedsetup.PressMENU, then select Help > Guided Setup. Select the type of
guided setup you would like and press OK. The Setup App is displayed.
There are black/gray
bars on the top/bottom/
sides of the picture.
•SettheTVtoWideorZoomMode.PressMENU, then select Wide. Highlight Wide or Zoom and press OK.
•Adjustthevideosettingsofyourexternaldevice(Blu-ray
™
or DVD player).
•IfusingtheRGB(computer)input,ensureyouareusingasupporteddesktopresolution.
•Sometelevisionchannelsaddblackbarstothepicture.
I cannot view 3D content.
•Ensureyouhavea3DBlu-ray
™
player, VIZIO Theater 3D glasses, and a Blu-ray 3D
™
disc.
•Turnyour3DHDTVand3DBlu-rayplayeroff.Turnthe3DBlu-rayPlayeronrst,thenturnthe3DHDTVon.
Try to play your Blu-ray 3D
™
movie again.
•Ensureyour3DBlu-rayplayer’s3DsettingisEnabled/Auto. (Devices differ, see your player’s user guide.)
The TV displays “No Signal”
•Ensureyourconnecteddevicesareturnedon.
•PresstheINPUT button on the remote and select the input to which your device
is connected (HDMI, Composite, etc).