VIZIO VOJ320F1A User Manual
Version 8/25/2008 27
www.VIZIO.com
2.7 Connecting an external Receiver/Amp
1. Turn off the power to the LCD HDTV and
Receiver/Amp.
2. Using an audio cable (white and red
connectors), connect the cable to the audio
input connectors on the Receiver/Amp and
connect the other end to the ANALOG OUT
(white area) audio connectors at the rear of the
LCD HDTV.
3. Turn on the power to the LCD HDTV and
Receiver/Amp.
4. Then press the
button on the remote control to open the On-Screen Display (OSD)
menu.
5. Press the
on the remote control to select the Audio Adjust menu.
6. Press the
on the remote control to select SPEAKERS.
7. Press the
on the remote control to select OFF so that the sound from the LCD HDTV will
now be routed through your Receiver/Amp system.
To Next Page
Loading...
Need help?
General
