Need help?Do you have a question about the Vizio XMF1000 and is the answer not in the manual?
Lists necessary tools for mounting the HDTV bracket.
Illustrates and lists all included mounting bracket parts.
Details various screws, washers, and anchors included in the kit.
Uses a stud finder to locate studs and drills pilot holes.
Secures first bracket, attaches mount bar, levels, and marks second hole.
Drills second pilot hole and attaches the second bracket.
Tightens lag bolts, levels bar, and secures the mounting bar.
Attaches an optional extender to lengthen the mounting bar.
Drills a pilot hole into the concrete wall using a 1/2" bit.
Inserts anchor and attaches first bracket with lag bolt.
Attaches second bracket using anchors and lag bolts.
Secures bar, levels, and tightens lag bolts.
Attaches the handle or optional extender to the bar.
Locates TV mounting holes and attaches TV hooks.
Secures TV hooks with screws; optional spacers for tilt.
Attaches and secures kickstands to the bottom mounting holes.
Orients the bar and hangs the TV onto the mount.
Locks the TV, adjusts position, and sets the tilt angle.
Installs an optional anti-theft device to prevent TV removal.
Provides VIZIO's contact details, fax, email, and operating hours.
To Next Page
General