VIZIT-ML300
VIZIT-ML300
SPECIFICATIONS
V9…15
7.2
OPERATI CONDITIONS
-40C +45C
98% 25C
SAFETY INSTRUCTIONS
VIZIT-ML300M
VIZIT-ML300M-40
VIZIT-ML300M-50
M
M contains a degaussing module sealed together with electromagnet coil.
VIZIT-ML300M
VIZIT-ML300M-40
VIZIT-ML300M-50
DC
kg 300 ± 60
W
mm
kg
VIZIT-ML300M 2.5
VIZIT-ML300M-40 2.8
VIZIT-ML300M-50 3.0
NG
PARTS LIST
15 VDC
INSTALLATION
1-3
4
Electromagnetic lock is (30 to 50 mm thick) .
oltage, :
Holding force (U=12V)
Power consumption, (U=12V):
:
Ambient temperature range: up to
Relative humidity of air: up to at .
h
.
used to lock doors as part of access control systems
, The lock shall be used together with a door closer.
The following versions are available:
-;
-;
-.
Operating v
,
Dimensions,
Weight, :
-
-
-
T e lock does not contain voltage above .
Do not make any connections or repair, when the power is on.
The lock shall be installed inside the building according to directions on Figures
The armature plate is fixed on the door. The electromagnet is fixed on the door frame opposite to the armature
plate. The electromagnet’s work surface is shown on Figure .
To ensure maximum holding force, the armature plate shall be fixed as close to the door edge as possible, taking into
account the electromagnet’s position.
Note: It is more convenient to make markings for the electromagnet and armature plate installation, if the door is
closed.
OPERATING INSTRUCTION
:
The lock is mounted inside the building on a door opening outwards.
Handle the equipment with care. Damage the mating surface of magnet or armature plate may reduce
locking efficiency.
CAUTION to
For qualified installation, wiring and servicing refer to technical and commercial partners of VIZIT TM. The list of
companies is given on VIZIT.EU ( .http://vizit.eu/eurounion/)
Lock parts
Electromagnet
Armature plate
Width
Height
Depth
188
55
35
126
55
12
Title
VIZIT-ML300M-40 VIZIT-ML300M-50
Electromagnet
Armature plate
1 ( 40х40 )Fastening kit angle bar mm
Fastening kit 2 angle bar mm( 50х50 )
Fastening kit for armature plate mounting()
1
1
1
1
1
1
Package
Operating instruction
-
1
1
1
1
1
VIZIT-ML300M
1
1
1
-
-
1
1
1
-
Fastening kit plate bar3 ( )
1
-
-
www. 201 -Operating Instruction VIZIT-ML300M-x (revision 6 06)vizit.eu 1 3/
To Next Page
General