For each maintenance operation, fill in
the "Periodic maintenance operation
record sheet" provided, so as to keep a
trace of the operations performed and
therefore establish the most suitable
methods for future operations.
Routine maintenance table (after running-in)
For each maintenance operation, fill in
the "Periodic maintenance operation
record sheet" provided, so as to keep a
trace of the operations performed and
therefore establish the most suitable
methods for future operations.
Frequency
(1)
Component Type of intervention Intervention procedures Reference
Every 10
hours
(every day)
Engine oil
(2)
Level control Top up, if necessary
See “Engine oil level
control”
Coolant
(4)
Level control Top up, if necessary
See “Engine coolant
level check”
Air filter Check it is clean
Clean with low pres-
sure compressed air
Coolant fluid radia-
tor
Check it is clean Clean with a soft brush
After the first
50 hours (at
the end of
running-in)
Engine oil
(2)
Replacement
See “Engine oil
change”
Oil filter
(3)
Replacement
See “Oil filter cartridge
replacement”
Transmission belt
(5)
Checking the ten-
sion
Tension belts
See “How to adjust the
tension of the driving
belt”
Integrity control Replace, if necessary See “Belt replacement”
Frequency
(1)
Component Type of intervention Intervention procedures Reference
Every 10
hours
Engine oil
(2)
Level control Top up, if necessary
See “Engine oil level
control”
Coolant
(4)
Level control Top up, if necessary
See “Engine coolant
level check”
Air filter Check it is clean
Clean with low pressure
compressed air
Coolant fluid radia-
tor
Check it is clean Clean with a soft brush