For each maintenance operation, fill in
the "Periodic maintenance operation
record sheet" provided, so as to keep a
trace of the operations performed and
therefore establish the most suitable
methods for future operations. 
Routine maintenance table (after running-in)
For each maintenance operation, fill in
the "Periodic maintenance operation
record sheet" provided, so as to keep a
trace of the operations performed and
therefore establish the most suitable
methods for future operations. 
Frequency
(1)
Component Type of intervention Intervention procedures Reference
Every 10 
hours
(every day)
Engine oil
(2)
Level control Top up, if necessary
See “Engine oil level 
control”
Coolant
(4)
Level control Top up, if necessary
See “Engine coolant 
level check”
Air filter Check it is clean
Clean with low pres-
sure compressed air
Coolant fluid radia-
tor
Check it is clean Clean with a soft brush
After the first 
50 hours (at 
the end of 
running-in)
Engine oil
(2)
Replacement
See “Engine oil 
change”
Oil filter
(3)
Replacement
See “Oil filter cartridge 
replacement”
Transmission belt
(5)
Checking the ten-
sion
Tension belts
See “How to adjust the 
tension of the driving 
belt”
Integrity control Replace, if necessary See “Belt replacement”
Frequency
(1)
Component Type of intervention Intervention procedures Reference
Every 10 
hours
Engine oil
(2)
Level control Top up, if necessary
See “Engine oil level 
control”
Coolant
(4)
Level control Top up, if necessary
See “Engine coolant 
level check”
Air filter Check it is clean
Clean with low pressure 
compressed air
Coolant fluid radia-
tor
Check it is clean Clean with a soft brush