D700/750 E2-E3
Maximum power
kW (CV)
rpm
62 (84,3) 102 (138,7)
Maximum torque
Nm
(kgm)
366 (37,3) a 1200 613 (62,5) a 1200
CONSUMPTION AT MAXIMUM POWER
Specific fuel consumption g/kWh
250 230
Specific oil consumption g/CVh
FUEL SUPPLY CIRCUIT
Type of injection
Direct injection
Type of fuel
The engine has been designed to be powered by standard fuels available
on the European market (according to specifications DIN EN 590). If it is to
be powered by BIODIESEL fuels (according to specifications UNI EN
14214), it can be mixed, up to 5%, with fuel available on the European
market (according to regulation DIN EN 590).
Do not use fuels with specifications other than those indicated.
Fuel supply
Diaphragm pump
Injector supply
Mechanical rotary injection pump
LUBRICATION CIRCUIT
Type of lubrication
Forced lubrication
Circuit fuel supply
Rotor pump
Oil change including filter (standard sump) liters (kg)
8,8 12,3
Oil quantity at minimum level (standard sump) liters (kg)
Oil quantity at maximum level liters (kg)
The oil quantity at maximum level ( litre) depends on the capacity of the oil
sump with which the engine is equipped.
Oil pressure at minimum speed (with started
engine)
bar
2 1,5
Alarm for oil pressure too low bar
0,3 - 0,5 0,3 - 0,5
Oil cooling
Oil/water cooler
COOLING CIRCUIT
Total capacity of cooling circuit (excluding radiator
and relevant pipes)
liters
5 7,5
Setting pressure of the expansion tank plug
bar
1,1 1,1
Coolant
Demineralised cold water 50% + Antioxidant and anti-freeze fluid 50%
(Inhibited glycol ethylene in compliance with ASTM D 3306)
Coolant maximum temperature alarm °C
109 109
Opening value (start/finish) of thermostatic valve °C
80-90 80-90
ELECTRIC SYSTEM
Nominal voltage V
12 o 24 12 o 24
Alternating current generator (nominal voltage) V
14 o 28 14 o 28
Alternating current generator (nominal current) A
55 55
Starter motor output kW
2,3 2,3
Recommended battery capacity Ah
92 100
Battery breakaway current A
480 550
SUCTION CIRCUIT
Maximum depression allowed with new air filter mbar
20 a 1500 rpm 20 a 1500 rpm
25 a 1800 rpm 25 a 1800 rpm
40 a 2300 rpm 35 a 2300 rpm
Model D754 TPE2 D756 IPE2
To Next Page
Loading...
