EasyManua.ls Logo

VMC VW-330-CW User Manual

Default Icon
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
VW-330-CW CHECK WEIGHER
INSTRUCTION MANUAL
www.balances.com is your VMC deep discount distributor
display will show
"00SAVE"
, after 2 seconds, the display will return to
USA
A
SI
A
Virtual Measurements & control.Inc. Virtual Measurements & control (Asia) Pte.Ltd.
3196 Coffey Lane,Suite 604, 24 Hillview Terrace Singapore 669235
Santa Rosa, CA 95403, USA Tel: (65) 67625522 Fax: (65) 6763 6656
Tel: (707) 573 3111 Fax: (707) 573 3113 sales@virtualmc.com
htt
p
://www.virtualmc.com
Question and Answer IconNeed help?

Do you have a question about the VMC VW-330-CW and is the answer not in the manual?

VMC VW-330-CW Specifications

General IconGeneral
Auto Shut-offYes
Capacity330 lbs
Platform Size12 x 12 inches
Power2W
Power SourceBattery

Summary

V. REMARK

Scale Placement and Leveling

Ensure the scale is horizontal with the bubble level aligned with the red circle for accurate readings.

Battery Charging Alert

Charge the battery immediately when the recharging sign appears; charging takes about eight to ten hours.

Approved Charger Usage

Only use the charger (adapter) supplied with the scale to prevent damage or malfunction.

Battery Replacement

If the battery life is short after recharging, it needs to be replaced with a new one.

Power Saving Measures

Turn off the back-light for power saving and turn off the unit when not in use.

I. Power On

Initial Power On Procedure

Place scale horizontally, ensure bubble level is aligned, then turn on power.

II. Function Explanation

Weight Indicators and Keys

Explanation of weight display, tare weight, gross weight, low/high limit indicators, and other key functions.

III. Operation

Zeroing the Scale

Press the ZERO key to set the scale to its correct zero position for accurate weighing.

Weighing Modes Selection

Details on operating in CHECK WT and WT weighing modes, including setting limits.

Weighing Mode Conversion

Instructions on how to switch between CHECK WT and WT weighing modes using specific keys.

IV. Calibration

Calibration Procedure

Step-by-step guide on how to calibrate the scale, including entering calibration mode and using weights.