18
Bluetooth operating instructionst
Connection:
Step 1: Switch the input source in the SETTING MENU or press the Bluetooth
button of the remote;
Step 2: Turn on the Bluetooth function of the mobile phone, search for
“VMV D1se", and tap to pairing. When the mobile phone displays
“connected", it has been successfully connected.
Re-connection:
When you had lost the connection with the D1se, for example,going out, and
back home, some phones will not re-connect the D1se if the D1se has not
been re-boot, so you can press the Bluetooth button (FN) on the remote to
Re-connect.
Clear pairing: Long press the “Bluetooth" button(FN) on the remote control. After clearing
the pairing, some phones may no longer be able to search for “VMV D1se". In
this case, you need to delete the Bluetooth device “VMV D1se" which saved in
the phone, and then search and pairing again.
This product is equipped with a Bluetooth button, which is the FN button
on the remote control,The functions of this button include:
Short press: Switch directly to Bluetooth input, if Bluetooth loses connection, it is
a reconnect;
Long press: Disconnect the current device and allow pairing with other devices.
To Next Page
Loading...