17
Bluetooth operating instructionst
Connection:
Step 1: Switch the input source in the SETTING MENU or press the Bluetooth
button of the remote;
Step 2: Turn on the Bluetooth function of the mobile phone, search for
“VMV
D2r", and tap to pairing. When the mobile phone displays
“connected", it has been successfully connected.
Re-connection:
When you had lost the connection with the D2r, for example,going out, and
back home, some phones will not re-connect the D2r if the D2r has not
been re-boot, so you can press the Bluetooth button (FN)
on the remote to
Re-connect.
Clear pairing:
Long press the “Bluetooth" button(FN) on the remote control. After clearing
the pairing, some phones may no longer be able to search for “VMV D2r". In
this case, you need to delete the Bluetooth device “VMV D2r" which saved in
the phone, and then search and pairing again.
This product is equipped with a Bluetooth button, which is the FN button
on the remote control,The functions of this button include:
Short press: Switch directly to Bluetooth input, if Bluetooth loses connection, it is
a reconnect;
Long press:
Disconnect the current device and allow pairing with other devices.
To Next Page
Loading...