Need help?Do you have a question about the Vocality V100 and is the answer not in the manual?
General| Data Rate | 2.048 Mbps (E1), 1.544 Mbps (T1) |
|---|---|
| Protocols | SIP |
| Management | Web-based GUI, CLI, SNMP |
| Channels | 30 |
| Power Supply | 100-240 VAC, 50-60 Hz |
| Operating Temperature | 0°C to 50°C |
Overview of the V100 multiplexer's capabilities and architecture.
Details the various functions and features supported by the V100 multiplexer.
Describes analogue voice and fax channel support, including interfaces and signaling.
Explains data port capabilities, including sync/async operation and interface standards.
Details the ISDN BRI Extender card for extending ISDN services.
Introduces the integrated IP router functionality and its Ethernet port.
Outlines network topologies like Star, Mesh, and Broadcast networks.
Details AC and DC supply voltage requirements for the V100 and Compact models.
Specifies the operating conditions like temperature, humidity, and pressure.
Provides instructions and precautions for installing option cards into the V100 chassis.
Details the Analogue Voice/FAX card, its connectors, and channel configuration.
Describes the ISDN BRI Extender card for connecting to terrestrial ISDN networks.
Explains the process of upgrading the V100 system software using the flash utility.
Explains the importance and configuration of the unique Node ID for each chassis.
Guides on using the formatted menu control structure for V100 configuration.
Describes the formatted supervisor and Teletype modes for V100 interaction.
Details the three levels of password protection: Read-only, Read/Write, and Superuser.
Overview of the V100's menu system for accessing configuration options.
Covers system settings like Node Name, Node ID, and remote configuration.
Provides access to sub-menus for configuring voice services within the V100.
Details voice channel configuration, clock reference, and signaling type.
Explains universal data port configuration for aggregate or tributary modes.
Configures the integrated IP router features, including general settings and networks.
Sets Ethernet mode, DNS, DHCP server, and other general IP parameters.
Configures Ethernet IP settings, bridging, and Spanning Tree Protocol.
Defines static routes for the IP router to reach external networks.
Manages IP filtering and forwarding decisions based on protocol headers.
Defines address ranges for use in service management filtering definitions.
Defines protocols and ports used in Service Management filters.
Combines address ranges and protocols to define IP filters.
Configures point-to-point IP connections for multiplexing over IP networks.
Manages configuration and operation of the E1 Link Card.
Details the ISDN BRI Extender for presenting ISDN BRI at remote locations.
Allows entry of keys to enable enhanced features in the V100.
Enables logging onto any unit in the network via its Node ID.
Explains the function of the V100's front panel LED indicators for status display.
Describes the alarm relay and its integration with network monitoring systems.
Provides access to troubleshooting tools for IP, E1/T1/J1, Syslog, and call statistics.
Offers IP troubleshooting tools like ping, route table, statistics, and ARP table.
Details running ping tests and analyzing results for network troubleshooting.
Displays static routes in use for IP traffic forwarding.
Shows packet statistics and ARP conversions for the Ethernet interface.
Configures sending log messages to an external Syslog Daemon.
Explains how the V100 dynamically allocates bandwidth based on traffic demands.
Describes linking chassis via HSC for expanded channel capacity.
Demonstrates configuring two V100s back-to-back for setup and operation familiarity.
Explains combining V100 with satellite modems for telecommunications links.
Shows configuration of V100 units connected via IP aggregates for multiplexing.
Declares conformity with EMC and safety standards.
Details the pin assignments for the Supervisor/Alarm Port (RS485, RS232).
Lists pin assignments for various data port interface standards (V.11, RS449, V.35, RS530, V.24).
Details pin connections for analogue voice ports in Tie-line and FXS/FXO modes.
To Next Page
