Buzzer & LED Indicator Status
Action
LED Status
Buzzer
Power on Backlight on Beep one time
Factory reset n/a
Beeping until reboot is
complete.
Identify
Red/Green lights flash
alternately twice
Unlock Green flash one time Beep one time
Lock Red flash one time Beep one time
Activate keypad
Backlight on. With
Locked,red is on; with
Unlocked,green is on.
n/a
Tap key Backlight flash one time Beep one time
Lock wrong status(Jammed)
Flash red twice.both red
and green is off when
backlight is on.
Beep one time
Locked keypad after enter
error password 4 times
All LED is off and keypad
shuts down for 60s.
n/a
Keypad stand-by All LED is off n/a
What’s Included:
- Smart Lock
- Quick Start Guide
- Installation instructions
Features:
Support Bluetooth v4.2
Touch keypad
Low power comsumption
Works with Apple HomeKit
Can be remotely controlled
Electrical Ratings
4 x AA
Quick Start Guide
1. Installed the smart lock refer to installation instructions;
2. Push up the battery cover and open the battery case, insert battery, 4 x AA, the keypad backlight will be
To Next Page
Loading...
