Belts and Clips
Operators wear terminals on a customized belt that is purchased from Vocollect. The terminal
is attached to the belt with a specially designed clip.
The clip is attached to the Vocollect belt at the beginning of a shift. Then, the operator
can attach the terminal to and remove the terminal from the clip as often as necessary
throughout the shift.
T5 Black Belt Clip - This clip is used to connect a T5 terminal to the belt.
Product notes
• To comply with government safety standards, the terminal must be used with the
Vocollect belt and clip.
• Operators must regard the belt clip and the terminal as two separate entities. The clip
should be attached to the Vocollect belt at the beginning of a shift. Then, the operator can
attach the terminal to and remove the terminal from the clip as often as necessary
throughout the shift.
• Vocollect strongly recommends that the terminal be worn on the right side of the body
with the terminal’s buttons on the top and its connectors toward your back.
Specifications
Belt Specifications
Belt material Nylon
Velcro® YKK Hook and Loop
Belt fastener ITW Nexus 127-3200
To Next Page
Loading...