VOCOO VC5260 - User Manual

P o w e r O n
2. Start /Stop Countdown:
After the countdown time ا؛ set. press [®] button
once to start count!ng; press [®] button aga!n to stop
counting, press and ho!d [®] button for resetting.
3. B u z ze r A ! a r m :
Wh e n t h e c o u n td o w n t ím e r e a c t i e s 00 m i n u t e s a n d 0 0
seconds, ttie digita! timer wit! buzzer with the screen
ftashing. Press the [®] button to stop the atarm. If
ttiere is no operation, the atarm sound will tast for 60
secondsfYou can choose the proper volume via the
volume adjustment button).
A.Recall the last Setting:
After your last countdown time finished, simply press
the [®] button once to recall the last setting, and then
press the [®] button again to start another counting.
Note:
The minimum adjustment unit is 5s/time. In working
status. If there Is no operation, the brightness will
automatically decrease after 5seconds.In non-working
status, the brightness will automatically decrease after
5seconds and the display turns off after 10 seconds to
enter the power saving mode.
Overview
Place 3AAA batteries correctly inside battery
compartment and close battery door. The lED is fully
displayed with abeep sound.
Thank you for purctiasing vocoo Knob digital timer. It
is adigital timer with count up and countdown function,
counting down from 99 minutes and 55 seconds to zero,
or as astopwatcli counting up from zero to 99 minutes
and 55 seconds. Suitable for cooking and baking,
exercise, gym, workout, sports, games, classroom
teacliing and etc.
Knob D!gltal Timer
How to Use
Using as acountdown timer
1. Countdown Time Setting:
Rotate the knob to set the time you want.
Turn right: forward 5s/1 min (slowly /gulcklyl
Turn left: back 5s/1 min (slowly /guickly)
(The minimum adjustment unit is 5seconds)
Note:
When you rotate the knob quickly and the angle is
larger than 60 degrees, the number will increase or
decrease rapidly.
V ٠ CO٠
(
I
Diagram
Brightness Battery Volume
Large LED Display Adjustment Coyer Adjustment
ا
ا
One button
operation
Magneto
Antl-sIlp pad
Knob
Model:VC5260

Summary

Overview and Diagram

Power On and Usage Instructions

Powering On the Timer

Insert 3 AAA batteries correctly. The LED displays fully with a beep sound.

Setting Countdown Time

Rotate knob to set time. Adjusts in 5s increments; faster rotation increases/decreases numbers rapidly.

Starting, Stopping, and Resetting Countdown

Press button once to start/stop countdown. Press and hold button for resetting.

Countdown Alarm and Recall

Alarm sounds at 00:00 with flashing screen. Press button to stop. Recall last setting with a button press.

Stopwatch Function Operation

Set to zero, then press button to count up from 00:00 to 99:55. Alarm sounds at max time.

Adjustments and Placement

Volume Adjustment Options

Adjust volume by switching button on back. Options include mute (screen flashing) or audible alarm.

Display Brightness Modes

Switch between normal mode and constant light mode for display brightness.

Timer Placement Methods

Use magnets on iron surfaces (e.g., fridge) or place upright on a table.

Battery Replacement and Specifications

Battery Replacement Procedure

Slide battery cover, remove old batteries, insert new AAA 1.5V batteries with correct polarity.

Product Specifications

Details on voltage, temperature, size, counting range, volume, and weight.

Warranty Information

Includes a 45-day return policy and an 18-month quality guarantee.

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

This document describes the VOCOO Knob Digital Timer, model VC5260, a versatile digital timer designed for a variety of uses including cooking, baking, exercise, gym workouts, sports, games, and classroom teaching.

Function Description

The VOCOO Knob Digital Timer offers both count-up and countdown functionalities. As a countdown timer, it can be set to count down from a maximum of 99 minutes and 55 seconds to zero. As a stopwatch, it can count up from zero to a maximum of 99 minutes and 55 seconds. The timer features a large LED display for clear visibility and a single button for operation.

Usage Features

Power On: To power on the device, insert three AAA batteries correctly into the battery compartment and close the battery door. The LED display will fully light up, accompanied by a beep sound, indicating that the device is ready for use.

Using as a Countdown Timer:

1. Countdown Time Setting: To set the desired countdown time, rotate the knob. Turning the knob to the right will increase the time, while turning it to the left will decrease it. The adjustment unit is 5 seconds when rotated slowly or 1 minute when rotated quickly. A notable feature is that if the knob is rotated quickly at an angle greater than 60 degrees, the time will increase or decrease rapidly, allowing for faster adjustments.
2. Start/Stop Countdown: Once the countdown time is set, press the single button (marked with a circle and a dot) once to start the countdown. To pause the countdown, press the button again. To reset the timer to its initial set time, press and hold the button.
3. Buzzer Alarm: When the countdown reaches 00 minutes and 00 seconds, the digital timer will activate a buzzer alarm, and the screen will flash. To stop the alarm, press the button. If no action is taken, the alarm sound will continue for 60 seconds. The volume of the alarm can be adjusted using the volume adjustment button located on the back of the device.
4. Recall Last Setting: After a countdown has finished, you can easily recall the last set time by pressing the button once. To start another countdown with the same setting, press the button again.

Using as a Stopwatch: To use the device as a stopwatch, first ensure the display shows 00 minutes and 00 seconds by pressing and holding the button. Once the display is at zero, press the button once to initiate the stopwatch function. The timer will then begin counting up from 00 minutes and 00 seconds, reaching a maximum of 99 minutes and 55 seconds.

Volume Adjustment: The timer's volume can be adjusted via a switch on the back of the device. There are two main volume settings:

• Volume Closed (Mute): In this mode, when the timer reaches 00 minutes and 00 seconds, there will be no button tone or alarm sound. The screen will highlight for 5 seconds, then dim, and continue flashing for 60 seconds. This is ideal for environments where silence is preferred.
• Volume Opened (Loud/Soft): When the volume is open, the timer will emit a "BIBIBI" alarm sound for 60 seconds when it reaches 00 minutes and 00 seconds. The screen will also highlight for 5 seconds and then dim. This mode offers both loud and soft alarm options, which can be selected using the volume adjustment switch. The device also indicates "Mute: screen flashing" as an option.

Brightness Adjustment: The display brightness of the timer can be adjusted between two modes: normal mode and constant light mode. This adjustment is made using the brightness adjustment button located on the back of the digital timer.

Power Saving Mode: To conserve battery life, the timer incorporates a power-saving feature. In working status, if there is no operation for 5 seconds, the display brightness will automatically decrease. In non-working status, the brightness will also decrease after 5 seconds, and the display will turn off completely after 10 seconds to enter power-saving mode.

Placement Options: The VOCOO Digital Timer offers flexible placement options:

1. Magnetic Attachment: The back of the timer is equipped with powerful magnets, allowing it to be easily attached to any iron surface, such as a fridge door or microwave oven. An upgraded silicone pad is included to prevent the magnets from scratching your appliances.
2. Tabletop Placement: The timer can also be simply placed upright on a table-top for convenient viewing.

Maintenance Features

Battery Replacement: The digital timer is powered by three AAA 1.5V batteries, which are included with the device. To replace the batteries, slide away the battery cover, remove the old batteries, and then insert new AAA 1.5V batteries into the battery slot, ensuring correct polarity.

VOCOO VC5260 Specifications

General

Type	Timer
Power Source	Battery
Display	Digital
Model	VOCOO VC5260
Dimensions	70 x 65 x 20 mm