Need help?Do you have a question about the VocoPro KJM-8000 PRO and is the answer not in the manual?
General| Dimensions | 19 x 5.25 x 10.5 in (482.6 x 133.35 x 266.7 mm) |
|---|---|
| Weight | 12 lbs (5.44 kg) |
| Outputs | 2 x RCA 1 x 1/4" headphone |
| Effects | Digital Echo |
| Type | Professional Karaoke Mixer |
| EQ | 3-Band |
Instructions for safely removing the unit from its packaging and retaining materials for potential return.
Guide on connecting the mixer's Master Out L/R jacks to an amplifier's audio input.
Instructions for connecting audio/video sources like CD, LD, or DVD players.
Steps to connect a video source and output video to a TV monitor.
How to connect an external powered subwoofer using the Sub Bass Out jacks.
Details on connecting turntables and other players via Line and Phono inputs.
Information on connecting microphones and instruments using XLR or 1/4" inputs.
Controls the input level for LINE and XLR microphone inputs.
Adjusts high frequencies for the microphone signal, aiding feedback reduction.
Adjusts mid frequencies for the microphone signal.
Adjusts low frequencies for the microphone signal.
Enables or disables the EQ settings for each microphone channel.
Adjusts the amount of digital echo for each microphone channel.
Balances the microphone output between the left and right channels.
Monitors the input signal of a channel through headphones.
Raises or lowers the volume of each corresponding microphone channel.
Sets music suppression level when an announcer speaks.
Sets time for music to return to normal volume after speaking.
Allows selection of the channel the announcer wishes to talk over.
Enables automatic or manual activation of the talkover feature.
Switches between two players without video output.
Switches between three players with video output.
Controls the input level for players connected to the corresponding channel.
Adjusts high frequencies for the music signal.
Adjusts mid frequencies for the music signal.
Adjusts low frequencies for the music signal.
Balances the music signal between the left and right channels.
Monitors the input signal of a music channel through headphones.
Controls the volume for each music channel.
Switches music between Master and Key Control functions.
Selects channels to be included in the cross fade effect.
Creates a blending effect by fading one source into another.
Connector for an optional 12V lamp.
Main power switch for the unit.
Displays sound or cue levels from music sources.
Adjusts music key and removes vocals from multiplex CDs.
Adjusts frequencies between 64Hz and 16kHz.
Toggles the graphic equalizer function on or off.
Adjusts the overall amount of digital echo on mic channels.
Adjusts the interval repetition of the echo effect.
Adjusts the length of each echo interval.
Turns digital effects (echo, repeat, delay) on or off.
Switches headphone meter between mix or cue signals.
Sets the volume level for headphone monitoring.
Port for connecting headphones for monitoring.
Controls the volume for the monitor output jacks.
Controls the volume for the master output jack.
Details on the optional KJM-7900 Pro Expandability Module.
Technical specifications for the microphone input module.
Technical specifications for the music input module.
Technical specifications for master outputs and other features.
To Next Page
