To Next PageTo Next Page
Need help?Do you have a question about the VOGELS THIN 305 and is the answer not in the manual?
Essential warnings must be read before proceeding with wall mount installation.
Attach the upper part of the strips (A) to the television using screws.
Adjust the strip length to match the screen size and mounting hole pattern.
Attach the lower part of the strips (A) to the television using screws.
Drill the center hole and screw the wall mount (A) to the wall, but do not fully tighten.
Level the wall mount (A) and drill left/right holes, then tighten all three bolts (N).
Hang the TV onto the wall mount (A), adjusting level for 100mm VESA width.
Position for convenient access and connection of cables.
Detach the television from the wall mount (A).
General
