EasyManua.ls Logo

Voksi CLASSIC+ - Assembly of Inner Duvets After Wash; Storing the Voksi Classic+; Warnings

Voksi CLASSIC+
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ASSEMBLY OF INNER DUVETS AFTER WASH
- Lay the clean and dry inner duvet out flat. (As in fig. 1)
- Insert the duvet into the cover.
- Fasten the duvet to the inside of the duvet cover by tying the two
strings located at the bottom end and the string at the top of the
head end.
- Pull all strings out of their holes. Make certain that the strings come
out of the correct holes. Remember to pull string 5b out on the le-
hand side seam.
STORING THE VOKSI
®
CLASSIC+
- When not in use, keep the Voksi
®
Classic+ in its packaging bag or a
bag made of cloth or paper. Do not store in a plastic bag.
WARNINGS
- When using the Voksi
®
Classic+ bag it is important that you always
take the outdoor temperature and weather conditions into account,
and ensure that the child is dressed appropriately.
- The drawstrings 7a & 7b must always be tightened when the child is
laying inside the Voksi
®
Classic+ bag so that a protective edge is
created around the child.
- Always tuck drawsstrings 7a & 7b safely away in their pocket to
avoid potential hazard.
- Carefully read the washing instructions and care label before
washing the Voksi
®
Classic+.
- Regularly check for damaged or loose parts and replace as needed.
Only use original spare parts and accessories.
- Do not place the Voksi Classic+ near an open fire or other source of
strong heat.
- The handles and the bottom of the Voksi Classic+ should be
inspected regularly for signs of damage and wear.
- Never use this product on a stand.
- Do not leave the flexible carrying handles inside the carry cot.
- Do not add another mattress on top of the mattress provided or
recommended by the manufacturer.

Related product manuals