Volkswagen 1964 1200 User Manual

Details on speedometer, warning lights, and fuel gauge for monitoring vehicle status.

Explanation of pedals like clutch, brake, and accelerator for vehicle operation.

Description of levers and switches for lights, wipers, and heating.

Locating identification plates, numbers, and understanding vehicle keys.

Essential checks before driving: oil, fan belt, fuel, tires, brakes, mirrors.

Checking and topping up engine oil and fan belt tension.

Fuel tank capacity, fuel tap operation, and reserve fuel.

Tire maintenance, pressures, and brake operation checks.

Operation of lighting switches and engine starting procedures.

Detailed starting instructions and steps for moving off.

Instructions for shifting through gears, including reverse and downshifting.

Guidance on gentle braking, avoiding wheel lock, and engine braking.

Procedures for stopping the car and adjusting front seats.

Tips for proper seating posture to avoid fatigue.

Operation of interior light, ash tray, and windshield wipers.

Refilling washer fluid and loading luggage for balance.

General information on operating the convertible top.

Operation of sliding roof, clearing misted windows, and lowering top.

Step-by-step guide to raising the convertible top.

Information stating breaking-in instructions are not necessary.

Rules for performance, service life, and gear speed limits.

Tips for fuel economy, acceleration, and pedal use.

Adapting speed, smooth acceleration, and engine braking.

Efficient driving at high speeds and fuel consumption factors.

Observing road conditions and car signals.

Headlight operation and explanation of warning lights.

General safety, speed adjustment, and mirror use.

Procedures for overtaking and stopping temporarily.

Techniques for parallel parking and parking on slopes.

Appreciating heating and starting in cold weather.

Oil grade recommendations and chassis protection.

Preventing brake freezing and door lock freezing.

Tire use, snow chains, and battery performance in winter.

Adjusting spark plugs for improved cold starting.

Role of lubrication in performance, safety, and longevity.

Performing lubrication carefully and at prescribed intervals.

Necessity of regular oil changes for engine wear and lifespan.

Procedure for draining old oil and refilling with new HD oil.

Recommended intervals for engine oil changes based on conditions.

Explanation of SAE grades and recommended oils for seasons.

Details on lubricating the transmission and differential.

Lubrication requirements for the steering gear.

Lubrication of front axle, king pins, and tie rod ends.

Information on front wheel bearings being packed with grease.

Lubrication of brake cables for smooth operation.

Lubrication of door locks, striker plates, and hinges.

Greasing the sliding surfaces of seat runners.

Lubricating the joints of the convertible top linkages.

Common causes of tire failure: inflation, speed, skidding, and impacts.

Avoiding overloading and protecting tires from elements and fluids.

Checking tires for wear, damage, and replacement recommendations.

Importance of static and dynamic wheel balancing for smooth running.

Step-by-step guide for changing a flat tire, including tool locations.

Procedure for tightening wheel bolts diagonally for secure mounting.

Maintaining the car's appearance with durable paintwork and protection.

Instructions for washing the car, including tools and approved cleaning agents.

Applying wax to restore elasticity and provide a water-repellent finish.

When and how to polish the car, avoiding abrasives.

Methods for removing tar spots, insects, and other foreign matter.

Care and cleaning procedures for the convertible top fabric.

Cleaning and care instructions for leatherette upholstery.

Best methods for cleaning windows without affecting paintwork.

Maintaining weather strips for perfect sealing and reducing friction noise.

Preventing mould and dampness by airing the interior during non-use.

Information on authorized workshops and performing minor repairs.

Procedure for checking and cleaning the oil bath air cleaner.

Instructions for adjusting and replacing the fan belt.

Procedure for cleaning the fuel filter and carburetor adjustment.

Guidance on carburetor adjustment, emphasizing idle speed settings.

Procedure for adjusting valve clearance when the engine is cold.

Inspecting spark plugs and checking engine compression.

Importance of correct ignition timing for performance and engine health.

Steps for adjusting breaker point gap and setting ignition timing.

Procedures for checking battery voltage, acid level, and terminals.

Manual procedure for aiming headlights correctly.

How to replace headlight and parking light bulbs.

Procedure for replacing indicator and license plate bulbs.

Replacing warning lights, instrument bulbs, and fuses.

Checking brake linings, fluid reservoir, and fluid type.

Procedure for removing air from the hydraulic brake system.

Adjusting foot brakes, clutch pedal free-play, and hand brake.

Adjusting front wheel bearings and torsion arm link pins.

Checking toe-in and adjusting door locks and windows.

Description of the engine, its components, and lubrication system.

Details of the pressed steel frame, front suspension, and parts.

How power is transmitted, gearbox, and rear axle design.

Operation of hydraulic foot brakes and mechanical hand brake.

Description of the body structure, ventilation, hood release, and luggage space.

How the heating system works, including air circulation.

Detailed specifications for bore, stroke, capacity, compression, and valve clearance.

Data for horsepower, lubrication, oil capacity, fuel pump, and cooling.

Specifications for generator, ignition distributor, spark plugs, and clutch.

Ratios for all forward gears, reverse, and rear axle ratio.

Oil capacity for transmission and rear axle in different units.

Specifications for springs, steering, wheels, tires, brakes, dimensions, and weights.

Recommended tire inflation pressures for occupant loads and driving.

Specifications for wheel base, track (tread), and toe-in.

Standard fuel consumption, performance data, and hill-climbing ability.

List of bulbs used in the vehicle, their specifications, and part numbers.

Information on authorized workshops and performing minor repairs.

Procedure for checking and cleaning the oil bath air cleaner.

Instructions for adjusting and replacing the fan belt.

Procedure for cleaning the fuel filter and carburetor adjustment.

Guidance on carburetor adjustment, emphasizing idle speed settings.

Procedure for adjusting valve clearance when the engine is cold.

Inspecting spark plugs and checking engine compression.

Importance of correct ignition timing for performance and engine health.

Steps for adjusting breaker point gap and setting ignition timing.

Procedures for checking battery voltage, acid level, and terminals.

Manual procedure for aiming headlights correctly.

How to replace headlight and parking light bulbs.

Procedure for replacing indicator and license plate bulbs.

Replacing warning lights, instrument bulbs, and fuses.

Checking brake linings, fluid reservoir, and fluid type.

Procedure for removing air from the hydraulic brake system.

Adjusting foot brakes, clutch pedal free-play, and hand brake.

Adjusting front wheel bearings and torsion arm link pins.

Checking toe-in and adjusting door locks and windows.