I*
I
SEEUEG
PRNS321
CONTROLS
AND
EQUIPMENT
Navigation system*
pressing the button A in the wiper/washer models only - see figure,
lever (for longer than 2 seconds): Driving information of all other vehicles ap-
- Navigation display
Pears
in tne navigation system display
field.
- Multi-function display The operation of the Volkswagen navigation
system is detailed in a separate supple-
ment.
When the navigation system or multi-func-
tion indicator are in use, any faults that may
occur will be shown with priority in the dis-
play via the on-board computer - as of page
•
CONTROLS
AND
EQUIPMENT
On-board computer with Multi-function indicator*
Only on vehicles with a navigation
system*
The on-board computer constantly checks
certain functions and vehicle components
for their condition when the ignition is on
and also when the vehicle is in motion.
These displays show the display of the
multi-function indicator and the on-board
computer. The functions and displays of the
multi-function indicator are detailed on page
10.
i
Any faults in the function or any urgent re-
' pairs or service requirements will be
indi-
cated via an acoustic signal and, according
to priority, displayed through red and yellow
symbols in the combi instrument.
Furthermore, information texts will be
shown in the display as an additional aid for
the driver to the red and yellow symbols.
The information texts shown in the il-
lustrations of this Owner's Manual are in
German.
The information texts and
driver's notes will appear in the following
languages according to the country:
English,
French, Italian, Spanish, Portu-
guese and Czech.
Function check
Vehicles with manual gearbox
If there are any faults, these will be dis-
played after turning on the ignition. At the
same time, the appropriate acoustic warn-
ing signal will sound:
Vehicles with automatic gearbox
After switching on the ignition, the follow-
ing driver's note appears in the display
when the selector lever is in position"P"
and "N":
"APPLY FOOT BRAKE WHEN SELECTING
GEAR WITH VEHICLE STATIONARY".
This note will disappear when a driving
range is selected ("R","D"
etc.).
If there are one or more faults, the driver's
note will disappearapprox. 15 seconds after
starting the engine and a fault symbol with
the appropriate information text will appear
in the display
field.
For all vehicles:
If there is a fault an acoustic warning signal
will also sound:
- Priority 1 - three warning tones
- Priority 2 - one warning tone.
Three warning tones will sound if faults of
Priority 1 and 2 are present.
If there is a fault, the symbol will appear
with the appropriate information text.
Note
Faults of Priority 2 will not be displayed
until Priority 1 have been repaired or cor-
rected!
COCKPIT
25
To Next Page
Loading...
