Volt VTR-100SL-SS - Page 3

Your general capacity should have been determined prior to
purchasing your transformer. Circuit loads should not exceed 80%
of capacity. As a general rule, total light xture wattage should
not exceed 80% of transformer capacity. To determine your
total wattage, simply add up the wattage of all xture lamps.
This number should be 20% less than the transformer’s wattage
capacity. If you need help with this, give customer service a call
at 813-978-3700. If you are over capacity, your installation may
require a secondary or larger transformer.
DETERMINE THE LOAD
www.voltlighting.com
Notes:
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________