Volt VTR-100SL-SS - Page 9

Attach all of your wires to the transformer. Using the
common and voltage terminals split each wire and t one
side into the common and one side into your desired voltage
terminal (some transformers will only have one terminal).
1. Fish the wire through wire slots and into the transformer.
2. Flip up the easy connect lever which will allow wire entry.
3. Bare the lead ends of your wires to allow metal to metal
contact within the connector.
4. Slide one side of the wire into the common terminal and one
side into the voltage terminal, then clamp both levers down onto
the wires. Check for a strong connection by rmly pulling on the
wire.
Quick Start Step 4
www.voltlighting.com
4
H
r
s
6
H
r
s
8
H
r
s
1
0
H
r
s
O
F
F
O
N
2
H
r
s
D
a
w
n
D
u
s
k
-
4
H
r
s
6
H
r
s
8
H
r
s
1
0
H
r
s
O
F
F
O
N
2
H
r
s
D
a
w
n
D
u
s
k
-
1 2
3 4