VOLTECH AT3600 USER MANUAL CREATING THE PROGRAM
TEST PROGRAM EDITOR VPN 98 - 024 PAGE 3.3.31.
When the compensation measurements have been successfully completed, the
compensation values for each test in the program will be stored inside the tester. Any
subsequent measurements (started as described above by clicking on Tester - Run
Program) will return compensated results to the Editor.
If you are not sure whether to compensate or not, simply try it. If any of the results
change significantly, then it should be done.
REMEMBER: Whenever you make changes to the program, the compensation
results in the tester will no longer be valid.
Make sure to compensate again each time you download a test program to an
AT Series Tester, whether the program has changed or not.
To Next Page
Loading...