VOLTECH AT3600 USER MANUAL INTRODUCTION
1. INTRODUCTION
The server program supplied with your AT series tester may be considered as an on-
line storage system.
The server will handle two types of data:
- TEST PROGRAMS
- TEST RESULTS
Test programs that are created using the editor application may be uploaded into the
server central file store. All testers connected to the server then have access to the
central store. Programs are called up from the server, sent to and then executed
within the tester.
The features of the server include:
• MS Windows application style dialogues and tools
• Storage of all previously created test programs
• Transfer of test programs to the tester on request
• Viewing of test programs outside the test program editor environment
• Test results may be received and stored in a database ready format for easy off -
line analysis
• OLE 2 support allowing real-time analysis of your production test system
Test programs may be stored on floppy disk for back-up or inter-site transfer
Installation and setup of the server program is explained in Chapter 2.
USING THE SERVER VPN 98 - 024 PAGE 4.1.1.
To Next Page
Loading...
