VOLTECH AT3600 USER MANUAL TEST PROGRAM HANDLING
2. TEST PROGRAM HANDLING
2.1. STORING TEST PROGRAMS
After a test program has been created using the program editor application it will be
ready for use with your AT series tester. The diagram below shows a potential
connection scheme for use with a single tester and two PCs.
Before program requests or uploads may be completed, the tester must be configured
for server mode. See Chapter 2, section 2.3.3.
There are two ways that you may transfer test programs into the server file store:
1. By selecting ‘Upload Program’ from the editor ‘Tester’ menu .
USING THE SERVER VPN 98 - 024 PAGE 4.2.1.
To Next Page
Loading...