TEST RESULTS HANDLING VOLTECH AT3600 USER MANUAL
3.2.3. ON-LINE ANALYSIS VIA A DATABASE
The AT Server software can store test results in an electronic database. This provides
a very powerful and versatile method of recording and analysing test results
historically or on-line. The Server uses standard Windows methods (including OLE
DB and ODBC) to connect to a variety of databases that conform to these
specifications.
Once stored in a database the data may then be analysed using tools available in the
database application or tools provided by specialist software packages such as those
available for SPC (Statistical Process Control). One example of this is to monitor in
real time the trend in a winding resistance to identify a defective drum of copper.
You would then be able to rectify the fault during production rather than producing a
large stock of QA failed transformers all wound with the defective wire.
SETTING UP DATABASE RESULTS STORAGE
From the 'Setup' menu, select 'Results' to see the following dialogue:
Select 'Standard Results Saving' (CSV) to save all results to a spreadsheet compatible
file. See 3.2.4.
Select 'Database Results Saving' to save results to a database. For this feature to
operate properly, a connection to the database must be set up first.
CSV and database format results can be saved simultaneously.
PAGE 4.3.6. VPN 98 - 024 USING THE SERVER
To Next Page
Loading...