Voltech AT3600 - Page 214

TEST RESULTS HANDLING VOLTECH AT3600 USER MANUAL
This call returns a result on success or a failure string:
“INVALID COM PORT” no valid com port found
“COM PORT IS NOT OPEN” com port requested not connected to an
AT Series Tester
“INVALID RESULT NUMBER” the requested result number is out of range
“NO RESULT” no updated result data available
Further Voltech Server OLE functions are described below. They use the same
format and failure strings as 'GetVariant Result'. Only function specific responses
and return values are shown.
NewDataAvailable (LPCSTR ComPort)
Returns TRUE or FALSE (Boolean 1 or 0 as variant) depending on whether new
data is available. If this function returns true it means that new data can be read
back via the OLE. If false then no new data has come in since the last read
GetPartID (LPCSTR ComPort)
Returns the part name on success or a failure string:
“NO PART ID” no valid part name found
GetFixtureID (LPCSTR ComPort)
This call returns the fixture name on success or a failure string:
“NO FIXTURE ID” no valid fixture name found
GetOperatorID (LPCSTR ComPort)
This call returns the operator name on success or a failure string:
“NO OPERATOR ID” no valid operator name found
GetBatchID (LPCSTR ComPort)
This call returns the batch number on success or a failure string:
“NO BATCH ID” no valid batch number found
GetFirmwareID (LPCSTR ComPort)
This call returns the firmware version number on success or a failure string:
“NO FIRMWARE ID” no valid firmware version found
GetUnitID (LPCSTR ComPort)
PAGE 4.3.24. VPN 98 - 024 USING THE SERVER