VOLTECH AT3600 USER MANUAL SELF TEST
1.3. POWER ON
When the AT3600 tester is switched on it performs a self-test which lasts for about 10
seconds.
After power on you should see the following display:
The tester is now at the Top Level menu, and the soft-keys allow you to select which
of the four main functions you require:
EXECUTE is used when running the programs in production test.
MEASURE enables the tester to behave like a component analyzer, continuously
updating front panel readings for one type of test only.
PROGRAM is used to ‘group download’ programs from a server PC to the
tester’s permanent store, and to ‘Set-Up’ the options within the
tester.
SELF-TEST is used to perform a thorough self-test.
Each of these options are described in the following sections.
FRONT PANEL OPERATION VPN 98 - 024 PAGE 6.1.3.
To Next Page
Loading...
