VOLTECH AT3600 USER MANUAL QUICK START TUTORIAL
GETTING STARTED VPN 98 - 024 PAGE 2.3.17.
• As the fixture is already fitted, and compensation is not required with the example
transformer, simply press the NO COMP. soft-key to move on to the RUN-FINISH
display:
• Press the RUN soft-key to start program execution.
As the program is running, the RUN indicator (the yellow LED to the left of the
display) will be illuminated, and the display will indicate the test currently being
executed:
At the end of program execution, the PASS indicator (the green LED to the left
of the display) should be illuminated, and the display should show:
• Press the RUN soft-key several times to repeat the program execution.
On each run of the program, the test results will be passed back to the Server,
where they may be viewed in the ‘On-line Monitor’ window.
To Next Page
Loading...