EasyManua.ls Logo

Voltex CFWL - Page 5

Voltex CFWL
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTALLATION INSTRUCTIONS
5
GENERAL SAFETY WARNINGS
SAFETY PRECAUTIONS FOR BATTERIES
1. This appliance is not intended for use by persons (including children) with reduced
physical, sensory, or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
2. Use this appliance only as described in this manual. Any other use not
recommended by Voltex Electrical may cause fire, electric shock, or injury to
persons and void the warranty. If you have questions, please contact Voltex
Electrical first.
3. WARNING: If unusual wobbling or oscillating movement is observed, immediately
stop using the ceiling fan and contact Voltex Electrical or suitably qualified persons.
4. This appliance is intended for household use and similar applications only. It is not
suitable for use in an environment heavily laden with dust.
5. Do not operate any appliance that malfunctions or is dropped or appears damaged
in any way.
6. Do not allow any foreign object to enter through the lens opening or the rear of the
appliance as this may damage the appliance and/or the user.
7. There are no user-serviceable parts inside the appliance. Contact your local
electrician if servicing is required.
8. The replacement of parts of the safety suspension system device shall be
performed by suitably qualified persons only.
9. Make sure that the power supply is properly disconnected before maintenance.
10. Make sure the fan is switched off from the supply mains before cleaning.
1. Always use 2 x AAA battery type for CFWL, CFWL48, CFBL, CFBL48, and 1 x A23 12V
battery type for CFW, CFB, CFW48, CFB48 with this ceiling fan remote controller.
2. Ensure the batteries are inserted with the correct polarity.
3. Remove batteries from the remote control when not in use for long periods of time.
4. Batteries must be removed from the remote controller before it is discarded.

Related product manuals