2-4 Hrs
In extreme temperature conditions, the battery may not charge.
Avoid charging under direct sunlight
Let the scooter cool down for at least 10 minutes after riding before charging.
Ensure cooling fan on charger is operating at all times during charging.
Ensure charge port is dry before inserting charger.
Charging
The charging process takes
between 2 - 4 hours.
When the scooter's battery
meter is flashing on 0 bars,
recharge immediately
The charge port is located on the front right hand side of the battery box.
Insert the Round, three pronged connector into the charge port, then insert the
AC plug into a power socket. Switch power on to charge.
LED1 and LED2 will be red when scooter is charging.
LED2 will turn green and cooling fan will stop once scooter is fully charged.
Ensure the cap is closed when not charging to prevent water ingress.
To Next Page
Loading...