Place the top tether anchorage plate as shown in the illustration. Using the M8 bolt, tighten securely, to
16 i 2.5 ft. lbs. Place the plastic trim plate over the anchorage plate, if desired.
WARNING!
Child Restraint Anchorages are designed to withstand only those loads imposed by correctly fitted
Child Restraints. Under no circumstances are they to be used for adult seat belts or harnesses.
The anchorages are not able to withstand excessive forces on them in the event collision if full harness
seat belts or adult seat belts are installed to them.
An adult who uses a belt anchored in a Child Restraint Anchorage runs a great risk of suffering severe
injuries should a collision occur.
pg. 28 Seat belts
Seat belts, retractable
Always fasten the seat belts before you drive or ride.
To Next Page
Loading...
